- HOW TO APPLY CAT EYE GEL POLISH
 - HOW TO REMOVE
 
              HOW TO APPLY CAT EYE GEL POLISH
            - 
Prepare Your Nails:
- File your nails to your desired shape.
 - Gently push back your cuticles. Trim any excess cuticle if necessary.
 - Lightly buff the surface of your nails to remove shine. This helps the gel adhere better.
 - Cleanse your nails thoroughly with a dehydrator or nail cleanser to remove any oils or residue.
 
 - 
Apply Base Coat:
- Apply a thin, even layer of your chosen gel base coat.
 - Cure under your UV/LED lamp according to the manufacturer's instructions (usually 30-60 seconds for LED, 1-2 minutes for UV).
 
 - 
(Optional) Apply a Base Colour:
- For a more intense and deep cat eye effect, especially with lighter cat eye polishes, you can apply a thin layer of a solid gel colour (often black or a colour that complements the cat eye shade).
 - Cure this base colour layer fully.
 
 - 
Apply the First Layer of Cat Eye Gel Polish:
- Apply a thin, even layer of your cat eye gel polish. Do not cure yet!
 
 - 
Create the Cat Eye Effect with the Magnet:
- Immediately after applying the cat eye polish, take your chosen magnet.
 - Hold the magnet very close to the surface of the uncured gel polish, but do not touch it. A distance of about 1-3mm is ideal.
 - Hold the magnet in your desired position for 5-15 seconds. You'll see the magnetic particles within the polish being attracted to the magnet, forming a line, curve, or other shape.
 - Experiment with different magnet shapes, angles, and movements to achieve various effects:
- Straight Line: Hold a straight magnet horizontally, vertically, or diagonally over the nail.
 - Curved Line: Use a curved or cylindrical magnet and move it in a gentle curve.
 - Halo Effect: Use a round magnet and move it around the edges of the nail.
 - Wave Effect: Move a straight magnet in a wavy motion.
 - Ombre Effect: Start with a wide line and then use the magnet to push the particles towards the tip or cuticle.
 
 - Work one nail at a time.
 
 - 
Cure the First Layer:
- Once you are satisfied with the magnetic effect on a nail, immediately cure it under your UV/LED lamp. This will set the magnetic particles in place.
 
 - 
Apply a Second Layer of Cat Eye Gel Polish (Recommended):
- Apply a second thin, even layer of the cat eye gel polish. Do not cure yet!
 - Repeat step 5, using the magnet to create the cat eye effect again. This second layer often intensifies the colour and the magnetic effect.
 
 - 
Cure the Second Layer:
- Cure this second layer fully under your UV/LED lamp.
 
 - 
Apply Top Coat:
- Apply a thin, even layer of your chosen gel top coat to seal the design and add shine (or a matte finish).
 - Cure the top coat fully under your UV/LED lamp.
 
 
              HOW TO REMOVE
            Step 1: Use a 180 Grit File to remove the shine of the topcoat.
Step 2: Soak a wrap with gel remover or 100% acetone, place onto nail plate and leave for 10 minutes.
Step 3: Remove wraps and gently push away any loose product with a cuticle pusher. Remove any excess product with a 180-grit nail file.